Manufacturer of Storage Tanks in chennai

ASME AIR RECEIVER TANKS

Designed and constructed in accordance with ASME Section VIII Div-I Code for compressed air storage use.
“U” stamped and registered with the National Board of Pressure Vessel Inspectors.
Most designs include as per latest codes
Custom engineered designs available upon request.
Exterior surface painted with one coat standard shop primer.
Special exterior and interior coatings available upon request.
Design and Documentation using PV- elite software
Stage Wise Inspection from Raw Material to finished Product will be documented and sold along with equipment.

CUSTOM ASME/NON-CODE TANKS

Vi Energ Resources Pvt Ltd is your comprehensive source for custom fabricated ASME code pressure vessels in a variety of steel and alloy materials. We design and manufacture custom steel tanks for a wide range of application needs. Whether the application involves high or low temperature or pressure ratings, or requires special paint or linings, our custom steel tanks can be ordered and fabricated to your precise specifications. Our capabilities includes the design of custom pressure vessels to meet a wide range of requirements, including air separators and bladder tanks. Please contact us with your tank requirements.

“U” stamped and registered with the National Board of Pressure Vessel Inspectors.
Most designs include as per latest codes
Custom engineered designs available upon request.
Exterior surface painted with one coat standard shop primer.
Special exterior and interior coatings available upon request.
Design and Documentation using PV- elite software
Stage Wise Inspection from Raw Material to finished Product will be documented and sold along with equipment.

ASME CHILLED WATER BUFFER TANKS

Built to ASME Code Section VIII
National Board Registered
Carbon Steel
Gray Primer
150 PSI @ 400 °F
Other Design Pressures Available
Custom Sizes also Available

ASME HORIZONTAL FLASH TANKS

Designed for flashing of high pressure condensate into steam and low pressure heating supply mains. Flash tanks also reduce steam pressure prior to returning to either condensate tanks, boilers or discharge into the sewer mains.

FEATURES & BENEFITS

Construction	Carbon Steel
Maximum Temperature	450˚F
ASME Section VIII, Division 1	Stamped with Documentation
Working Pressure	As per Client request
Finish	Primed Gray Exterior / Plain Interior

Standard Unit Includes the Following

4” x6” Handhole on Diameters, 12”-36” Perforated Spray Pipe
Drop Leg

CARBON STEEL CHEMICAL BYPASS FEEDERS

By-Pass Feeders are a convenient method of introducing treatment chemicals into closed circulating water systems.

By-Pass Feeders are ideal for use in hot water treatment in heating systems or chill water air conditioning systems.

Industrial gray enamel finish paint.

NOTE: Inlet/Outlet Fittings are 3/4″ NPT

Weight and dimensions are approximate.
Flat Bottom Max.Working Pressure: 200 psi
Dome Bottom Max.Working Pressure: 300 psi
Max Working Temperature: 375ºF
All dimensions are +/- 1/8″ and weights are approximate.

Vi Energ Resources Pvt Ltd is OEM of Industrial equipments in following sectors OIL&GAS, Power and Heavy Construction equipments , Our Factory is ASME U Stamp Certified and ISO Integrated Management system.

Manufacturer of U Stamp Pressure Vessel,Heat Exchanger,Dew Point control skid, Basket Strainer, Air Receiver, Structural fabrication, Injection skids, Dosing skids. For any enquiries please mail to sales@vienerg.com Visit us @ www.vienerg.com

ASME Pressure Vessel / Storage Tanks