Vi Energ Resoources Private Limited is expertise in Manufacturing of Test Separator skid Packages in Chennai, India.
Test separator skid is a specialized equipment used to separate a mixture of three different phases, commonly oil, water, and gas mainly in Well Testing Industry. This type of separator is crucial in industries like Well Testing, , Early Production facility, Exploration and Upstream oil and gas production plants. Each components need to meet specific performance requirements such as 0.5% BS&W content in Oil, 2000PPM of Oil in Water and 0.1 US Gallon oil per MMSCFD of Gas.
Test Separator is used to monitor well geometry and lifetime of well and availability of crude.
In well testing industry, below standard three phase test separators are commonly used.
- 42 “ x 10 ft 1440 PSI Test Separator
- ,42 “ x 15 ft 1440 PSI Test Separator
- 48” x 10 ft 2160 PSI Test Separator
- Custom built Three phase separator also available upon request
Three phase separator design is basically based upon fluid flow rate , temperature , pressure and fluid properties.
Test separators are designed considering 1 min retention time. Where as in early production or production facility the retention time will be based upon crude oil properties which is varying from 3 mins to 30 minutes.
VERPL(Vi Energ resources private limited ) three phase separators are packaged in modular skids with pipings and control systems. Skid can be either CSC certified or DNV Certified.
Major Factors effecting Three phase separator design are Gas /liquid flowrates, operating & design consitions, surging or slugging tendency, physical properties, presence of impurities, foaming tendencies, corrosive tendencies, etc.
Three phase test separator consist of four sections Inlet diverter section, liquid collection section, Gravity settling section and Mist extractor section.
Vi Energ’s Test Separator are Compliance to following :
Test separators are designed and manufactured to API 12J, ASME Sec VIII Div 1, U Stamp, ANSI B31.3 and NACE MR-10-75 (H2S). DOSH certifications and CE Marking upon client request.
Test separators are designed and manufactured to in compliance with DNV 2.7-1 for offshore applications.
Test separators are designed and manufactured for different pressure ratings such as 150#, 300#, 600# and 900# based on clients requirements